Important Tips to Get Accurate Ketones Readings!

The Ketone Breath Monitor should be exhausted before first use because each unit is tested during production and may contain residuals; if you test another person after yours, please exhaust previous residuals as well.

To do so, repeat the warm-up procedure 1-2 times (without blowing) before your first test. During testing, blow immediately within the first 5-6 seconds when the device displays 'blo' on the ketosis tester, since the keto breath tester starts analyzing the breath right after the first 6 seconds.

Using Steps

1. Powered by 2x AA alkaline batteries (not included)
2. Press the power button for 3 seconds to start device
3. Warm-up and exhaust residuals
4. Blow for 5-6 seconds right after warm-up
5. Ketone meter analyzes and reading shows

Breath Acetone Concentration Readings (PPM)

• 0-2 PPM: You are not in ketosis or just right before ketosis.
• 3-4 PPM: You are at very early stage of ketosis.
• 5-10 PPM: You are in a light status of ketosis. The body fat is burning at a low pace.
• 11-39 PPM: You are in the optimum level of ketosis. This is the stable fat burning zone, the process of fat being used by the body as the main source of energy.
• 40-59 PPM: Be Caution! You are approaching too much ketosis level. Adjust your level to under 40ppm.
• 60-99 PPM: Danger! You are in too high level of ketosis. Ketoacidosis.

Ketone Breath Meter with 3 LED Indications: Green Light — Ketosis Reading Successfully, Amber Light — Low Battery, Red Light — Ketosis Reading Unsuccessfully

Contents of Package: 1x ketone breath analyzer device, 10x mouthpieces, 1x User's Manual

Notes: For best results, avoid brushing your teeth, smoking, drinking or eating 30 minutes before testing. Try to test under consistent conditions each time, such as fasting after waking up. Do not compare readings with traditional meters, as this device measures breath acetone, a direct indicator of fat burning.